Stationary Alarms - Filtering Alarms by Vehicle, Label, or Group

Filtering Alarms by Vehicle, Label, or Group

This configuration window allows users to set parameters for unit filtering options for this alarm, and is accessible on the Alarms Tab > Add Alarm > Stationary Alarms. Use these options to limit the scope of WHO a specific alarm condition applies to. See List of Units for an explanation of the difference between Vehicle ID, Label, and Group.

Vehicle

	All
	Applies alarm to all AVL vehicles regardless of their Vehicle ID.

	Select
	Limit the scope of this alarm to only select vehicles.

	All but
	Applies to all vehicles except for a few. Then type the vehicle IDs to be excluded from the scope of this alarm into the box.

	Selection Box
	When using Select or All but, enter the vehicles to be tracked here. Type the select vehicle(s) ID into the box. When typing, a list box will appear to pick from. This lists all current vehicle IDs. Use a semi colon to separate vehicle IDs in the list.

Labels

	All
	Applies alarm to all AVL vehicles regardless of their Label.

	Select
	Limit the scope of this alarm to only select Labels.

	Selection Box
	When using Select or All but, enter the vehicles to be tracked here. Type the select Label(s) into the box. When typing, a list box will appear to pick from. This lists all current Labels. Use a semi colon to separate Labels in the list.

	All but
	Applies to all Labels except for the labels designated to be excluded by the user.

	Blank
	<blank> notice that in the label pick lists there is a "<blank>" option. Select to include or exclude vehicles that have no label. Some agencies use a blank label to indicate that a vehicle is not currently on shift.

Groups

	All
	Applies this alarm to all AVL vehicles regardless of any group they are assigned to.

	Select
	Limits the scope of this alarm to only select groups.

	Blank
	When using Select, type the select group names into the box. When typing, a list box will appear to pick from. This is a list of all groups currently setup in the system. Use a semi colon to separate group names in the list.