Stationary Setup

This configuration window is used to set the parameters for the Stationary Alarm, and is accessible on the Alarms Tab > Add Alarm > Stationary Alarms.

Click on the interactive image below for more information.

	Stop Time
	Indicate here the continuous duration of stop time that must elapse before this alarm is triggered. A stop time of at least 10 minutes is the minimum advised, but a much longer period is recommended to avoid false alarms. Vehicles must report at a rate of at least once every 5 minutes to work with stationary alarms.

	Exclusion Area
	If using Pick Feature, this will default to the feature name, but it may be manually altered. If using Draw Fence, a short descriptive name should be entered here manually.